Grizzly G0611X VS Grizzly G0695 VS Grizzly G9968 VS Grizzly G0667X VS Grizzly G9933 Three Spindle Shaper

Grizzly G0611X 16-1/2″ Extreme Series Dovetail Machine

Grizzly G0611X 16-1/2" Extreme Series Dovetail MachineOur dovetail machines make it fast and easy to produce strong and attractive half-blind dovetail joints. Each machine is outfitted with stops and clamps, so you can quickly insert pre-cut boards, clamp them in place, and start cutting. With the ability to cut two joints at a time, these dovetail machines can produce a 4-sided drawer in under two minutes if the boards are prepared properly. Includes a 4-sided template for cutting 1″, 1-1/2″, 2″, and 2-1/2″ dovetails. Also spindle heads are micro-adjustable to give you complete control of dovetail “fit.” If you’re currently doing production dovetails with a dovetail jig, our dovetail machine will quickly pay for itself

Grizzly G0611X 16-1/2″ Extreme Series Dovetail Machine Specifications

  • Motor: 1 HP, 110V/220V, single-phase, prewired 220V
  • Table size: 24″ x 7-3/4″
  • Floor to table height: 46-7/16″
  • Number of spindles: 1
  • Spindle speed: 18,500 RPM
  • Dovetail bit: 10° angle x 5/8″ long
  • Dovetail shank: 12mm
  • Maximum dovetail height: 3/4″
  • Minimum dovetail height: 3/16″
  • Maximum thickness: 2-3/8″
  • Minimum thickness: 13/32″
  • Maximum stock size: 59″ long x 16-1/2″ wide
  • Minimum stock size: 7-7/8″ long x 2-3/8″ wide
  • Overall size: 38-5/8″ wide x 56-7/8″ high x 26-1/2″ deep
  • Approximate shipping weight: 539 lbs

You can visit link below to get more details or to check the price.

Grizzly G0611X 16-1/2″ Extreme Series Dovetail Machine

Grizzly G0695 VS Milling Machine with Ram Head

Grizzly G0695 VS Milling Machine with Ram HeadThis knee mill will be a fine addition to any home shop, school or job shop! Its outstanding features include fold up safety handles, one-shot lubrication, sliding/tilting head, fine down feed and last but certainly not least, infinitely variable spindle speed control with a digital tach! Now you can have speeds from 200 to 2250 RPM with just the turn of a dial. And it’s controlled by a state of the art Yaskawa frequency drive. The drive inverts and modulates the power to give you smooth speed changes with robust torque. Three-phase

Grizzly G0695 VS Milling Machine Features

  • 1-1/2 HP, 220V, 3-phase motor
  • Head slides in and out, swivels, and tilts left-to-right, enabling extremely versatile operations
  • Variable-speed frequency drive allows speeds from 200 to 2250 RPM
  • Runs on single-phase power using Yaskawa inverter
  • Features hardened and precision-ground leadscrews, dovetail ways, turret-style column, and fine downfeed on quill
  • Convenient one-shot lubrication system
  • Cast iron construction throughout machine

You can visit link below to get more details or to check the price.

Grizzly G0695 VS Milling Machine with Ram Head

Grizzly G9968 7-1/2 HP Shaper

Grizzly G9968 7-1/2 HP ShaperThis massive Spindle Shaper is built to our exacting specifications, resulting in ultra-smooth power, durability and humongous capacity. And check out these features: huge table measuring 33″ x 91″, 11-3/4″ cutter diameter capacity, 5-1/2″ capacity under the spindle nut, 5″ dust port, micro-adjustable 2 piece fence, and so much more! Use this 7-1/2 HP of high production power to generate revenue quickly! Great for shaping full-sized doors

Grizzly G9968 7-1/2 HP Shaper Specifications

  • Motor: 7-1/2 HP, 220V/440V*, 3-phase,TEFC induction, 20A/10A, 60 Hz, 3450 RPM
  • Prewired: 220V
  • Table size: 99-3/4″ x 33-1/4″
  • Table counterbore: 13″
  • Spindle travel: 5″
  • Spindle size: 1-1/4″
  • Spindle capacity under nut: 5-1/2″
  • Spindle length: 6″
  • Spindle speeds: 5500, 7500 and 10,000 RPM
  • Dust port: 5″
  • Maximum cutter diameter: 11-3/4″
  • Switch: Push button ON/OFF, emergency stop, forward and reverse
  • Bearings: Shielded and lubricated ball bearing
  • Overall dimensions: 91-3/4″ L x 40″ W x 45″ H
  • Approximate shipping weight: 1832 lbs

You can visit link below to get more details or to check the price.

Grizzly G9968 7-1/2 HP Shaper

Grizzly G0667X 9″ x 48″ High Precision Variable-Speed Vertical Mill

Grizzly G0667X 9 x 48 High Precision Variable-Speed Vertical MillThis is the cream of Taiwanese mills and it’s packed with the features all machinists love! Start with Meehanite castings, high-class spindle bearings, hardened and ground leadscrews with double-bronze nuts and a chromed quill with precision-honed housing! Now add an electronic variable speed spindle motor and you’ve got yourself one serious milling machine. Check out the other incredible features and you’ll agree, this is the cream of the crop

Grizzly G0667X 9″ x 48″ High Precision Variable-Speed Vertical Mill Specifications

  • Required power supply: 220V, single-phase, 15A
  • Motor: 3 HP, 220V, 3-phase, 8.5 Amps
  • Motor RPM: 1725
  • Power transfer: Cogged belt
  • Spindle taper: R-8
  • Spindle travel: 5″
  • Table size: 9″ x 48″
  • Table travel (longitudinal): 29″
  • Table travel (cross): 12″
  • Knee travel (vertical): 16″
  • Ram travel: 13″
  • Ram swivel: 360°
  • Max. dist. spindle to table: 18″
  • Head swivel: 90° left & right
  • Head tilt: 45° front & back
  • T-slots: 3 on 21/2″ centers, 5/8″ wide
  • Spindle speeds: Variable
  • Range of speeds: 60–5000 RPM
  • Spindle feed: 0.0015″, 0.003″, 0.006″
  • Quill diameter: 3.375″
  • Overall dimensions: 57″ L x 71″ W x 87-1/2″ H
  • Base footprint: 26″ x 24″
  • Approximate shipping weight: 2352 lbs

You can visit link below to get more details or to check the price.

Grizzly G0667X 9″ x 48″ High Precision Variable-Speed Vertical Mill

Grizzly G9933 Three Spindle Shaper

Grizzly G9933 Three Spindle ShaperThis 3 sided, heavy-duty shaper will pay for itself quickly in cabinet and production shops that normally require several shapers or time consuming cutter changes. The combinations of cutters and set-ups you can utilize on this machine are endless.

Separate FWD/REV Switch for each motor,3 micro-adjustable fences,Heavy-duty miter gauge included,Spindles include spacers and nuts,4″ convenient dust hood included,Includes service wrenches,1/2″ router bit spindle available as an option.

Grizzly G9933 Three Spindle Shaper Specifications

  • Motor size: 3 HP, 220V, single-phase, TEFC (Includes 3 motors)
  • Amp draw: 18 amps per motor
  • Precision-ground cast-iron table
  • Table working height: 35″
  • Spindle size: 1-1/4″ (3/4″ spindle available as an option)
  • Exposed spindle length: 4″
  • Spindle travel: 4″
  • Maximum cutter diameter: 6″
  • Spindle speeds: 7000 and 10,000 RPM
  • Table working size: 17″ x 32″ 13-1/2″ (each side)
  • Bearing type: Shielded and lubricated for life
  • Approximate shipping weight: 1260 lbs

You can visit link below to get more details or to check the price.

Grizzly G9933 Three Spindle Shaper

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.