Wood Working|
Feb
28
Filed Under (Other - Pets) by Kert
bkwrm175 asked:
I want to build some toys (house, tunnel, whatever) for my pet rabbit, and i’m not sure what kinds of glue would work, since they will most likely be chewed at some point in time. Is the old flour/water mix strong enough to actually hold things together?
ELMO
__________________________________________________________________
I want to build some toys (house, tunnel, whatever) for my pet rabbit, and i’m not sure what kinds of glue would work, since they will most likely be chewed at some point in time. Is the old flour/water mix strong enough to actually hold things together?
ELMO
Comments Off
Feb
28
jurassicbeaver asked:
My plate will probably be mahogany, turned up on a lathe. I want the finish to be microwave safe and food safe. Is there anything out there that will work?
JOSEF
__________________________________________________________________
My plate will probably be mahogany, turned up on a lathe. I want the finish to be microwave safe and food safe. Is there anything out there that will work?
JOSEF
Comments Off
Feb
27
Filed Under (Sports) by Kert
carterjohnson25 asked:
He promised me it would work …
PERCY
Comments Off
Feb
27
Filed Under (Howto) by Kert
kfyfb292 asked:
http://woodworkingplans.ca/free-plans.html Free cedar planter box plans. This design is elegant and easy to upkeep since it doesn't need to be filled with soil. Just drop in a pot with your favorite plant and water. …
RODOLFO
Comments Off
phoenix asked:
I bought scents package for closet but it doesn’t work
i don’t wanna do any painting
any suggestion from the shelf? i’ve try scented packages but it doesn’t work.
FREDERICK
I bought scents package for closet but it doesn’t work
i don’t wanna do any painting
any suggestion from the shelf? i’ve try scented packages but it doesn’t work.
FREDERICK
Comments Off
Feb
26
Filed Under (Do It Yourself (DIY)) by Kert
RichB asked:
I’ve read that a good technique is to (1) cut a template out of hardboard or MDF, (2) rough cut the work piece 1/8″ larger than the template, (3) attach the template and use a flush router bit to cut the workpiece flush to the template. I’ve tried this using 3/16″ hardboard for my template, but when I do the router cut I’m having a hard time making the cut flush to the template. The router I’m using is a straight router with a bearing at the top. I’m a novice at using the router, so any advice is appreciated.
RANDAL
I’ve read that a good technique is to (1) cut a template out of hardboard or MDF, (2) rough cut the work piece 1/8″ larger than the template, (3) attach the template and use a flush router bit to cut the workpiece flush to the template. I’ve tried this using 3/16″ hardboard for my template, but when I do the router cut I’m having a hard time making the cut flush to the template. The router I’m using is a straight router with a bearing at the top. I’m a novice at using the router, so any advice is appreciated.
RANDAL
Comments Off
Feb
26
Filed Under (Tech) by Kert
amandacheung1984212 asked:
CNC router work on wood, it is engraving two chinese words, which mean happy with long life. …
SIMON
Comments Off
Feb
23
Filed Under (Cleaning & Laundry) by Kert
oftheheart asked:
I have tried all the products at Home Depot and I don’t think they work very well…or as good as I would like. I have also noticed a few spots in bewteen the boards that have started to lift. Any suggestions. The floors are not even two years old.
EMERY
I have tried all the products at Home Depot and I don’t think they work very well…or as good as I would like. I have also noticed a few spots in bewteen the boards that have started to lift. Any suggestions. The floors are not even two years old.
EMERY
Comments Off
Feb
21
fireman_lll asked:
I’m thinking about buying a furnace but the blower only puts out 500 cfm. My furnace puts out 1600 cfm will this lower cfm be able to heat the house? I’m going to hook the add on to the existing duct work. I feel the air movement will not be sufficent.
ODELL
I’m thinking about buying a furnace but the blower only puts out 500 cfm. My furnace puts out 1600 cfm will this lower cfm be able to heat the house? I’m going to hook the add on to the existing duct work. I feel the air movement will not be sufficent.
ODELL
Comments Off
Feb
20
Filed Under (Cleaning & Laundry) by Kert
nshelly333@sbcglobal.net asked:
My dresser really got scratched up whiled moving it to my new apartment and not it is all scratched on the side and top. What can be used that works well?
DANE
My dresser really got scratched up whiled moving it to my new apartment and not it is all scratched on the side and top. What can be used that works well?
DANE
Comments Off